R
Custom Installation Series
T
E
C
H
N
O
L
O
G
Y
Owners Manual / Installation Instructions
CI-15
Box contents
1 Speaker
1 Grille
1 Paint mask
1 Cutout hole template
1 Euroblock connector
Pre-construction bracket (sold separately)
SpeedWing™ mounting arms
Grille safety clip
Euroblock connector
Grille
Paint mask
MSE Audio Group
8650 College Boulevard
Overland Park, Kansas 66210
(888) PHASE-TK
R
Installation Instructions: Installing the CI-15
Using the Pre-Construction Bracket
T
E
C
H
N
O
L
O
G
Y
1. Nail or screw bracket to
studs.
2. Finish installing wall.
3. Use RotoZip or other tool 4. Unpack speaker. Leave
to cut hole.
paint mask in place until
after speaker is installed or
painting is complete.
5. Connect Euroblock to
6. If required, attach
speaker wires, and connect seismic restraint system to
7. Insert speaker in hole.
Tighten the two clamping
screws. DO NOT
8. Remove paint mask
unless painting is required.
In that case, follow steps
9-12 when painting is
complete.
to speakers.
the hole in the metal
clamping arm, then to
reinforced structure (safety
cable not included).
OVERTIGHTEN.
1.
2.
9. Adjust tap switch to
proper setting. Switch is
preset to the 8-ohm mode.
10. Attach grille safety clip
by placing the large end of
the clip over snap-fit post
(1), then sliding clip until
small end snaps into place
around post (2).
11. Align tabs on snap-fit
grille with slots in baffle,
gently press grille into
place.
12. Done!
|
Pelco Home Security System C2410M I 1 06 User Manual
Pentax Camera Lens 06424 User Manual
Philips Computer Hardware ADM0101 User Manual
Philips Cordless Telephone DECT5253S User Manual
Philips DVD Player DVD726AT User Manual
Philips Flat Panel Television UM 10 User Manual
Philips Projection Television 9P 5544C User Manual
Pioneer DVD Player DVD 117 User Manual
Pioneer Stereo Receiver VSX 1024 K User Manual
Planar Computer Monitor FWT1503Z User Manual