Contents
Part 1. Using the ThinkPad 390 DVD/FDD Bay Drive
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Installing programs
. . . . . . . . . . . . . . . . . . . . . . 1-2
. . . . . . . . . . . . . . . . . . . . 1-6
Viewing a DVD movie
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 1-7
Installing programs
Viewing a DVD movie
. . . . . . . . . . . . . . . . . . . . . . 1-9
. . . . . . . . . . . . . . . . . . . 1-13
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 1-14
Part 2. Appendixes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Appendix A. Help and service information . . . . . . . . . 2-1
Step 1. Problem solving . . . . . . . . . . . . . . . . . . . . 2-1
Step 2. Preparing for the call . . . . . . . . . . . . . . . . . 2-2
Step 3. Placing the call to IBM . . . . . . . . . . . . . . . . 2-2
Appendix B. Product warranty . . . . . . . . . . . . . . . 2-3
Appendix C. Notices . . . . . . . . . . . . . . . . . . . . . 2-5
Copyright IBM Corp. 1999
iii
iv
Part 1. Using the ThinkPad 390 DVD/FDD Bay Drive
Note: The DVD movie player is supported by Windows 98 and Windows 95
OSR2.0 or later versions. You can check which version of Windows
95 you are using by doing the following:
The ThinkPad 390 DVD/FDD Bay Drive (hereafter called the DVD
option) supports the ThinkPad 390 series computer in the Windows
95 or Windows 98 environment, with either of the following
processors:
1. Click Start, move the cursor to Settings, and then click Control
Panel.
2. Double-click System.
Intel Pentium II Processor or faster
Intel Celeron 300-MHz processor or faster
Read the numbers under “System.”
To use the DVD option in your computer, you need to install the
software programs after inserting the DVD option into the UltraBay
FX. This book explains how to install software programs. For how to
insert the DVD option into your computer, refer to the User's
Reference of your computer.
4.00.950B means that it is Windows 95 OSR2.0 or OSR2.1.
4.00.950C means that it is Windows 95 OSR2.5.
Note: Be sure to keep your proof of purchase, because it might be required
for warranty services. (See Appendix A.)
Before you begin the installation, make sure that the following items
are included in your option package:
DVD drive
This user's guide
DVD Software CD-ROM
(includes software programs for
DVD movies)
Copyright IBM Corp. 1999
1-1
Removing the warm swap driver
Installing programs
To remove the warm swap driver, do the following.
If you want to view DVD movies, do the following to install the
software programs:
Note: To view the DVD movies comfortably, you need to remove the warm
swap driver.
To install the software programs, do as follows:
1
2
3
4
5
Remove the warm swap driver.
Update the video driver
1
2
3
4
5
6
7
Click Start.
Move the cursor to Settings, and click Control Panel.
Double-click Add/Remove Programs.
Click the Install/Uninstall tab.
Select Agate Tioman.
Enable the DMA setting.
Install the DVD movie player program (DVD Express).
Select the region code.
Details are provided in the following sections.
Click the Add/Remove button.
Follow the instructions on the screen.
If you are not going to watch DVD movies—that is, if you are going
to use the DVD drive only for reading DVD-ROMs or
CD-ROMs—you do not need to install these programs.
From now on, before replacing a device in the UltraBay FX, you need
to power off the computer.
1-2
Updating the video driver
9
Click Next.
To update the video driver, go to appropriate section.
If you are using Windows 98, go to the next section.
10 Click Display a list of all the device drivers in a specific
location so you can select the driver you want.
11 Click Next.
If you are using Windows 95, go to “Updating procedure for
Windows 95 .”
12 Click Have Disk...
Updating procedure for Windows 98
13 When you are prompted to specify the driver disk, type
x:\DISPLAY\ and click OK.
1
2
3
4
5
6
7
8
Insert the DVD Software CD-ROM into the DVD drive.
Click Start.
Note: x represents the drive letter of the DVD drive.
Move the cursor to Settings, and click Control Panel.
Double-click Display.
14 Select NeoMagic MagicMedia 256AV, and click OK.
15 Click Next.
Click the Settings tab.
16 Click Finish.
Click Advanced...
17 Click Close.
Click the Adapter tab.
18 Click Close again.
Click Change...
19 When you are prompted to restart the computer, click Yes.
The “Update Device Driver Wizard” window appears.
Part 1. Using the ThinkPad 390 DVD/FDD Bay Drive 1-3
Updating procedure for Windows 95
Enabling the DMA setting
1
2
3
4
5
6
7
8
9
Insert the DVD Software CD-ROM into the DVD drive.
Click Start.
1
Click Start, move the cursor to Settings, and click Control
Panel.
2
3
4
Double-click System.
Move the cursor to Settings, and click Control Panel.
Double-click Display.
Click the Device Manager tab.
Double-click the CDROM icon.
The DVD drive name appears under the CDROM icon.
Click the Settings tab.
Click Advanced Properties.
Click Change...
5
6
7
Double-click the DVD drive name.
Click the Settings tab.
Click Have Disk...
Put check marks in the DMA and Auto insert notification
check boxes by clicking them. If the alert dialog appears, click
OK to close it.
When you are prompted to specify the driver disk, type
x:\DISPLAY\ and click OK.
8
9
Click OK.
Note: x represents the drive letter of the DVD drive.
Click Close to close the “System Properties” window.
The system settings change dialog appears.
10 Click OK.
11 Click Close.
10 Click OK to restart the system.
12 Click Close again.
13 When you are prompted to restart the computer, click Yes.
1-4
Installing the DVD movie player program
Selecting the region code
To install the DVD movie player, do the following:
If you want to view a DVD movie on your computer, you need to set
the DVD region code. You can set the region code when you start
DVD Express for the first time.
1
2
3
Insert the DVD Software CD-ROM into the DVD drive.
Click Start and Run.
DVD region codes
Regional coding is part of the protection scheme for DVD content.
The world is divided into six regions, so that specific content can
be viewed only in the region where it is appropriate. For
example, Region 1 (U.S. and Canada) content can be viewed only
in Region 1. The DVD movie player application is also
region–specific.
Type x:\DVDPLAYR\SETUP and click OK.
Note: x represents the drive letter of the DVD drive.
4
Follow the instructions on the screen.
You must select a region to play DVD content. After you have
selected a region, you can play content only from that region.
Make sure the first DVD content you play is from the appropriate
region. You can verify the region code of the content by looking
at the region code symbol on the back of the content packaging.
Attention: If the first DVD you play is from a region other than
the region you selected, your system will no longer play DVD
content. Contact the IBM PC HelpCenter. See Appendix A.
Part 1. Using the ThinkPad 390 DVD/FDD Bay Drive 1-5
To select the region code, do the following:
Viewing a DVD movie
1
2
3
Insert the DVD-ROM into the DVD drive.
After you install the DVD drive and the programs, you can view a
DVD movie by doing the following:
Click Start.
1
Insert a DVD into the DVD drive.
Move the cursor to Programs, Madiamatics Express, and click
Madiamatics DVD Player.
If you want to watch a DVD movie on your TV, refer to the
User's Reference of your computer.
4
5
Click the play button ( ) of the “DVD movie player” window.
The “Select DVD Region” window appears.
2
3
Click Start, move the cursor to Programs, and click
Mediamatics DVD Express.
Select the region code and click OK.
Click Mediamatics DVD Player.
Region
Code
Region
The “DVD movie player” window appears. For more
information on how to play the DVD movie player, see the
Online User's Guide of your computer.
1
2
3
4
5
6
U.S, Canada
Europe, Middle East, South Africa, Japan
Southeast Asia, Taiwan, Korea
Latin America, Australia, New Zealand
Former Soviet Union, the rest of Africa, India
People's Republic of China
Notes:
1. Your computer has been configured to provide the highest quality audio
and video playback based on the available system resources. You can
alter the default settings by changing the video resolution setting within
the Control Panel of Windows 95 or Windows 98. Some systems do not
have enough resources to provide full-quality audio and video playback at
all resolution settings. If you experience poor playback performance,
adjust the resolution to a lower setting.
2. Audio or video streams are decoded in software. The audio and video
subsystems need to be fully functional and enabled.
Follow the instructions on the screen.
3. When you are viewing a DVD movie, the LCD resolution might be
automatically set to 800 x 600, 256 colors.
1-6
Troubleshooting
Problem
Cause and action
If you play the DVD Express with
Windows 98 or Windows 95, the “No valid
Disk/Drive found” message appears.
This message appears when you reboot or restart your ThinkPad computer with the
DVD-ROM left in the DVD drive. Remove the DVD-ROM from the drive and then
reinsert it.
If the problem persists, check the drive assignments. Assignments should not skip letters.
Suppose, for example, that you has assigned the hard disk drive as the C drive and the
DVD drive as the E drive, and nothing is assigned as the D drive. In this case, you would
need to assign the DVD drive as the D drive. To change the drive letter form E to D, do
the following:
1. Click Start, move the cursor to Settings, and click Control Panel.
2. Double-click Device Manager.
3. Double-click the letter currently assigned to your DVD drive (for example, E).
4. Click the Settings tab.
5. Select D in “Start drive letter” under “Reserved drive letters.”
6. Click OK and restart the computer.
The LCD resolution degrades when you
play a DVD movie.
Reset the LCD size as follows:
1. Click Start, move the cursor to Programs and ThinkPad. Then click ThinkPad
Configuration.
2. Click the LCD icon.
3. Click Enable in “Screen Expansion.”
4. Click OK.
Part 1. Using the ThinkPad 390 DVD/FDD Bay Drive 1-7
Part 2. Appendixes
marketing. Additional support offerings, including step-by-step
installation assistance, are available for a nominal fee.
Appendix A. Help and service
information
During the warranty period, assistance for replacement or exchange of
defective components is available. In addition, if your IBM option is
installed in an IBM computer, you might be entitled to service at your
location. Your technical support representative can help you
determine the best alternative.
Note
This appendix provides general service information, and some
descriptions might not apply to your particular computer or suit
your situation.
Step 1. Problem solving
You might be able to solve the problem yourself. Before calling the
HelpCenter, please prepare for the call by following these steps:
If you have questions about your new Options by IBM product, or
require technical assistance, visit the IBM Personal Computing Support
IBM, IBM PC products, or Options by IBM, visit the IBM Personal
receive information from the IBM Automated Fax System at
1-800-426-3395 (in Canada, 1-800-465-3299), or from the Personal
Systems Group Bulletin Board System (PSG BBS) at 1-919-517-0001.
You can also get help and information through the IBM PC
1. If you are having installation or configuration problems, refer to
the detailed sections on installation found in this manual, and
review any README.TXT files found on the installation
diskettes.
2. Visit the Personal Computing Support Web site specific to the
model of option you have purchased. Updated installation
instructions, hints and tips, or updated system-specific notes are
often published in this section. You might find that later device
drivers are available that will improve the performance and
compatibility for your new option.
HelpCenter, 24 hours a day, seven days a week. Response time might
vary depending on the number and nature of the calls received.
Marketing, installation, and configuration support through the
HelpCenter will be withdrawn or made available for a fee, at IBM’s
discretion, 90 days after the option has been withdrawn from
If you are installing this option in an IBM computer, also visit the
applicable support Web page for that computer model. These
Copyright IBM Corp. 1999
2-1
pages might also contain useful hints and tips related to
installation of this option and might refer to BIOS or
device-driver updates required for your computer model. If you
are installing the option in a non-IBM computer, refer to the
manufacturer’s Web site.
7. Hardware and software configuration information for your system
If possible, be at your computer. Your technical support representative
might want to walk you through the problem during the call.
Step 3. Placing the call to IBM
3. Uninstall and then reinstall the option. During the uninstallation
process, be sure to remove any files that were installed during the
previous installation. Many IBM options include uninstallation
programs.
If you call 90 days or more after the date of withdrawal or after your
warranty has expired, you might be charged a fee.
For the support telephone number and support hours by country, refer
to the following table or to the enclosed technical support insert. If
the number is not provided, contact your IBM reseller or IBM
marketing representative.
4. Check all cabling to be sure that it is correct as shown in this
manual. When you connect a cable to a cable connector, pay
close attention to the colored stripes along the edge of the cable,
and ensure that they are matched with PIN 1 on both the
computer connector and the option connector.
Support 24 hours a day, 7 days a week
Canada
1-800-565-3344
1-800-772-2227
5. If your option contains jumpers or switches, be sure their
positions and orientation match the instructions in this manual.
U.S.A. or Puerto Rico
Step 2. Preparing for the call
Additional technical support resources
To assist the technical support representative, have available as much
of the following information as possible:
Online technical support is available during the life of your product.
Online assistance can be obtained through the Personal Computing
Support Web site, the PSG Electronic Bulletin Board System (BBS),
and the IBM Automated Fax System.
1. Option name
2. Option number
3. Proof of purchase
4. Computer manufacturer, model, serial number (if IBM), and
manual
5. Exact wording of the error message (if any)
6. Description of the problem
2-2
Online technical support
Machine: ThinkPad 390 DVD/FDD Bay Drive
Warranty period*: One year
IBM Personal Computing Support
Web site
*Contact your place of purchase for warranty service information.
IBM PSG BBS
1-919-517-0001
IBM Automated Fax System
1-800-426-3395
1-800-465-3299 (in Canada)
Production status
Each Machine is manufactured from new parts, or new and used parts. In
some cases, the Machine may not be new and may have been previously
installed. Regardless of the Machine's production status, IBM's warranty terms
apply.
Appendix B. Product warranty
The IBM warranty for machines
The following warranty information applies to products purchased in
the United States, Canada, and Puerto Rico. For warranty terms and
conditions for products purchased in other countries, see the enclosed
warranty insert, or contact your IBM reseller or IBM marketing
representative.
IBM warrants that each Machine 1) is free from defects in materials and
workmanship and 2) conforms to IBM's Official Published Specifications. The
warranty period for a Machine is a specified, fixed period commencing on its
Date of Installation. The date on your receipt is the Date of Installation, unless
IBM or your reseller informs you otherwise.
International Business Machines Corporation
Armonk, New York 10504
During the warranty period IBM or your reseller, if authorized by IBM, will
provide warranty service under the type of service designated for the Machine
and will manage and install engineering changes that apply to the Machine.
Statement of limited warranty
The warranties provided by IBM in this Statement of Limited Warranty apply
only to Machines you originally purchase for your use, and not for resale, from
IBM or your reseller. The term “Machine” means an IBM machine, its features,
conversions, upgrades, elements, or accessories, or any combination of them.
Unless IBM specifies otherwise, the following warranties apply only in the
country where you acquire the Machine. If you have any questions, contact IBM
or your reseller.
For IBM or your reseller to provide warranty service for a feature, conversion,
or upgrade, IBM or your reseller may require that the Machine on which it is
installed be 1) for certain Machines, the designated, serial-numbered Machine
and 2) at an engineering-change level compatible with the feature, conversion,
or upgrade. Many of these transactions involve the removal of parts and their
return to IBM. You represent that all removed parts are genuine and unaltered.
A part that replaces a removed part will assume the warranty service status of
the replaced part.
If a Machine does not function as warranted during the warranty period, IBM
or your reseller will repair it or replace it with one that is at least functionally
Appendix A. Help and service information 2-3
equivalent, without charge. The replacement may not be new, but will be in
good working order. If IBM or your reseller is unable to repair or replace the
Machine, you may return it to your place of purchase and your money will be
refunded.
a. follow the problem determination, problem analysis, and service
request procedures that IBM or your reseller provide,
b. secure all programs, data, and funds contained in a Machine, and
c. inform IBM or your reseller of changes in a Machine's location.
If you transfer a Machine to another user, warranty service is available to that
user for the remainder of the warranty period. You should give your proof of
purchase and this Statement to that user. However, for Machines which have a
lifetime warranty, this warranty is not transferable.
IBM is responsible for loss of, or damage to, your Machine while it is 1) in
IBM's possession or 2) in transit in those cases where IBM is responsible for
the transportation charges.
Extent of warranty
Warranty service
IBM does not warrant uninterrupted or error-free operation of a Machine.
To obtain warranty service for the Machine, you should contact your reseller or
call IBM. In the United States, call IBM at 1-800-772-2227. In Canada, call
IBM at 1-800-565-3344. You may be required to present proof of purchase.
The warranties may be voided by misuse, accident, modification, unsuitable
physical or operating environment, improper maintenance by you, removal or
alteration of Machine or parts identification labels, or failure caused by a
product for which IBM is not responsible.
IBM or your reseller will provide certain types of repair and exchange service,
either at your location or at IBM's or your reseller's service center, to restore a
Machine to good working order.
THESE WARRANTIES REPLACE ALL OTHER WARRANTIES OR
CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THESE WARRANTIES GIVE YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH
VARY FROM JURISDICTION TO JURISDICTION. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF EXPRESS OR IMPLIED WARRANTIES, SO THE
ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO
YOU. IN THAT EVENT SUCH WARRANTIES ARE LIMITED IN
DURATION TO THE WARRANTY PERIOD. NO WARRANTIES
APPLY AFTER THAT PERIOD.
When a type of service involves the exchange of a Machine or part, the item
IBM or your reseller replaces becomes its property, and the replacement
becomes yours. You represent that all removed items are genuine and
unaltered. The replacement may not be new, but will be in good working order
and at least functionally equivalent to the item replaced. The replacement
assumes the warranty service status of the replaced item. Before IBM or your
reseller exchanges a Machine or part, you agree to remove all features, parts,
options, alterations, and attachments not under warranty service. You also
agree to ensure that the Machine is free of any legal obligations or restrictions
that prevent its exchange.
You agree to:
1. obtain authorization from the owner to have IBM or your reseller service a
Machine that you do not own; and
2. where applicable, before service is provided —
2-4
Limitation of liability
Appendix C. Notices
Circumstances may arise where, because of a default on IBM's part or other
liability, you are entitled to recover damages from IBM. In each such instance,
regardless of the basis on which you are entitled to claim damages from IBM
(including fundamental breach, negligence, misrepresentation, or other contract
or tort claim), IBM is liable only for:
References in this publication to IBM products, programs, or services
do not imply that IBM intends to make these available in all countries
in which IBM operates. Any reference to an IBM product, program,
or service is not intended to state or imply that only that IBM product,
program, or service may be used. Any functionally equivalent
product, program, or service that does not infringe any of the
intellectual property rights of IBM may be used instead of the IBM
product, program, or service. The evaluation and verification of
operation in conjunction with other products, except those expressly
designated by IBM, are the responsibility of the user.
1. damages for bodily injury (including death) and damage to real property
and tangible personal property; and
2. the amount of any other actual direct damages or loss, up to the greater of
U.S. $100,000 or the charges (if recurring, 12 months' charges apply) for
the Machine that is the subject of the claim.
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF
THE FOLLOWING:
IBM may have patents or pending patent applications covering subject
matter in this document. The furnishing of this document does not
give you any license to these patents. You can send license inquiries,
in writing, to the IBM Director of Licensing, IBM Corporation, 500
Columbus Avenue, Thornwood, NY 10594, U.S.A.
1. THIRD-PARTY CLAIMS AGAINST YOU FOR LOSSES OR
DAMAGES (OTHER THAN THOSE UNDER THE FIRST
ITEM LISTED ABOVE);
2. LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA;
OR
3. SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR
ANY ECONOMIC CONSEQUENTIAL DAMAGES
(INCLUDING LOST PROFITS OR SAVINGS), EVEN IF IBM
OR YOUR RESELLER IS INFORMED OF THEIR
POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE
EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.
Appendix B. Product warranty 2-5
Trademarks
The following terms are trademarks of the IBM Corporation in the
United States or other countries or both:
IBM
ThinkPad
Microsoft, Windows, Windows NT, and the Windows logo are
trademarks of Microsoft Corporation in the United States and/or other
countries.
Pentium and Celeron are trademarks of Intel Corporation in the Unites
States and/or other countries.
Other company, product, and service names may be trademarks or
service marks of others.
2-6
IBM
Part Number: 22L2306
Printed in the United States of America
22L23 6
|